• Phone: +917982861686
  • Mail: info@feukem.com

ISO 9001:2015 Certified Company

Fire retardant coating must be applied by a qualified applicator.  |  Ensure proper surface preparation before application.  |  For technical support, contact Feukem India Pvt. Ltd.

Feukem FRC

Intumescent Fire Retardant Coating

FEUKEM FRC is a water-based fire-retardant coating formulated with special binder, minerals & fillers to provide fire resistance to GI/MS Ducts. FEUKEM FRC provides excellent insulation & fire barrier to Cellulosic Fire (ISO 834 fire curve). It is tested and conforms the requirement of BS 476 Part 20-24 to analyze stability, integrity & insulation performance.

FEUKEM FRC meets the requirement of VOC emissions and content requirement to contribute LEEDv4 EQ credit, hence recommended to use in Green Building Projects.

Download Brochure Download TDS
  • Overview

    Feukem FRC is a water-based intumescent fire retardant coating designed for GI/MS ducts. It forms a protective char layer when exposed to fire, providing insulation and fire resistance according to BS 476 Part 20-24 standards. Suitable for cellulosic fire scenarios (ISO 834 fire curve), it helps maintain duct integrity and insulation during fire events. Feukem FRC is low VOC and LEEDv4 compliant, making it ideal for green building projects.

  • Product Application

    FEUKEM FRC is recommended for application and use on dry protected substrate only. If base coat is allowed to get wet, it is likely to be damaged – blistering and wrinkling may occur. FEUKEM FRC should only be applied when the air and substate temperature are above 5 ̊ C and below 55 ̊C Relative humidity should be below 85% for successful application. Steel surface temperature should be a minimum of 3 ̊ C above the dew point, Ensure the substrate is dry and free from contact with rain or condensation during the application and drying of FEUKEM FRC.
    Please note that rain may cause surface patterning if the material has not formed a skin. Heavy rain or water running over the surface can damage recently applied (6 - 8 hours) coating and hence it should be protected if this is a potential risk.

  • Technical Specification
  • Download Resources
    Download Brochure Download TDS

Key Features & Benefits

Why Feukem?

Feukem delivers certified fire protection solutions trusted by leading industries and infrastructure projects across India. Our coatings are rigorously tested, easy to apply, and engineered for long-term durability and compliance with global safety standards.

Contact Sales Team  

Intumescent Technology

Expands when exposed to fire, forming a thick, insulating char layer that protects structural steel and other substrates from heat and flame.

High Fire Resistance

Provides up to 2 hours of fire protection, helping maintain structural integrity and compliance with international fire safety standards.

Easy Application

Can be applied by brush, roller, or spray on steel, concrete, and other approved surfaces. Fast drying and low VOC for safer application.

Durable & Versatile

Resistant to humidity, chemicals, and mechanical damage. Suitable for commercial, industrial, and infrastructure projects.

Other FRC Solutions

Feutape FX 50

Feutape FX 50

FEUTAPE is the Ceramic Gaskets that has excellent flexibility and is suitable to be used for fire rated ducts. It is flexible, durable & easy to use and proven excellent for preventing condensation problems & Energy saving.

Feukem Fire Stop Insum 500

Feukem Fire Stop Insum 500

FEUKEM FIRE STOP INSUM 500 is a fast setting, elastomeric water base joint sealant for low medium & high velocity heating & air conditioning ducts with 120 minutes of fire protection.

Our Clients

6-Community Center, 3rd Floor, East of Kailash-110065

New Delhi, India

Call for Enquiry:

+91 7982861686

Opening Hours :

Mon - Fri : 10AM-6PM

Email: info@feukem.com
Phone: +91 7982861686
Address: 6-Community Center, 3rd Floor, East of Kailash, New Delhi-110065, India
Contact on WhatsApp